JV200 GPS Tracker Installation Guide

 

IMPORTANT – THIS DEVICE IS ONLY TO BE INSTALLED BY SUITABLY QUALIFIED INSTALLERS

The tracking device should be  mounted inside of the vehicle.

The device has 4 wires but only 2 wires need to be connected making for a really easy installation.

You can switch the led lights off by pressing the button on the side of the tracker if you wish.

Ideally mount the device behind a trim panel or under the dashboard out of the way and run the power feed cables to a suitable source such as the fuse box.

Black – Earth/chassis

Red – Perm Live 12/24volts

Orange – Ignition/Accessory Live feed (optional)

Yellow – Output to trigger  immobiliser relay (optional)

Enabling the IMMOBILISER from the desktop.

Click on the information icon next to the tracker in the object list as shown.

Click on the toggle switch in the information bar at the bottom of the screen.

Enabling the IMMOBILISER from the APP.

Click on the information icon then scroll down to outputs box where you can toggle the outputs.